Differences

This shows you the differences between two versions of the page.

--- licensing:ftdi [2017/02/20 08:45] – [Enable FTDI Activation] tw
+++ licensing:ftdi [2021/06/20 08:23] (current) – SG-Lock sold out ulinobbe
@@ Line 2: / Line 2: @@
 Starting with version 6.0, mAirList supports activation via [[http://www.ftdichip.com/|FTDI]] USB devices. That means that you can use many FTDI-based USB dongles (including serial port adapters) as a security dongle for mAirList.
 ===== Supported FTDI Devices =====
 We support any USB dongles with the FTDI FT232R or FT485R chipset. The device must have at least 16 bytes of data available in the "User Area EEPROM", which should be the case for most dongles.
+==== Recommended Device: FTDI USB-Key ====
+{{ :licensing:pasted:20200303-070324.png?300}}
+We recommend using the [[http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_USBKey.pdf|FTDI USB-Key]] device, which was specifically designed to be used as a security dongle. Price is approximately 16 Euros including VAT (as of 01/2019).
+It can be ordered from the following online shops (among others):
+  * [[http://www.rs-online.com/|RS Components]], select country, then enter part number **555-147**
+    * [[https://de.rs-online.com/web/p/entwicklungskits-interface/0555147/|Direct link for Germany, B2B shop, for professional users]]
+    * [[https://www.rsonline-privat.de/Products/ProductDetail/FTDI-USB-Security-Dongle-555147|Direct link for Germany, B2C shop, for end users]]
+  * [[https://www.ftdichip.com/PrivacyNotice.htm|FTDI Web Shop]]
+==== Other Devices ====
 Devices which have been tested successfully include:
-  * [[http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_USBKey.pdf|FTDI USB-Key]], available from e.g. [[http://www.rs-online.com/|RS Components]], part number 555-147.
+  * <del>[[http://www.logilink.com/USB_20_to_Serial_Adapter_AU0034.htm|LogiLink AU0034]]</del> - Attention, there appears to be a new revision using an incompatible FT231X chipset (as of 02/2019).
-  * [[http://www.logilink.com/USB_20_to_Serial_Adapter_AU0034.htm|Logilink AU0034]]
 Other FTDI devices should work as well. Note that the device **must** have either the FT232R(L/Q) or FT485R(L/Q) chipset. Other chipsets, or devices from other manufacturers like Prolific, will **NOT** work!
-mairlist GmbH does not sell any FTDI dongles. Please order one from a distributor of your choice.
-The D2xx drivers must be installed in order to access the FTDI dongle. Recent Windows versions will install them automatically when you plug in the dongle for the first time; you can also download them from the [[http://www.ftdichip.com/FTDrivers.htm|FTDI website]] and install them manually.
 ===== Enable FTDI Activation =====
 ==== Step 1: Contact customer support ====
-Before completing the steps below, you should contact customer support at info@mairlist.com so we can check if your license will work with FTDI activation.
+Before completing the steps below, you should contact customer support at support@mairlist.com so we can check if your license will work with FTDI activation.
+If all your licenses are v6.0 or higher, everything is fine.
-<WRAP alert round>
+:!: Dongles to be used with older mAirList versions ("SG-Lock" type) are sold out and can not be replaced.
-**IMPORTANT NOTICE:**
+<WRAP info round>
+**IMPORTANT NOTE:**
 Once you have switched your license to dongle activation, the dongle "is" the license, or the key to the license. There is no way to recover the license if the dongle is lost or stolen.
@@ Line 31: / Line 47: @@
 mairlist GmbH does not sell any FTDI devices. Please obtain one from a dealer/distributor of your choice. Please see above for a list of FTDI devices that are known to work.
+**The D2xx drivers must be installed in order to access the FTDI dongle.** Recent Windows versions will install them automatically when you plug in the dongle for the first time; you can also download them from the [[http://www.ftdichip.com/FTDrivers.htm|FTDI website]] and install them manually.
+**The device must not be in use by any other application.**
 ==== Step 3: Initialize dongle ====
@@ Line 54: / Line 74: @@
 ==== Step 4: Send license code ====
-Send the license code, along with the five-digit serial number of your license, to the customer support at info@mairlist.com.
+Send the license code, along with the five-digit serial number of your license, to the customer support at support@mairlist.com, or reply to the ticket e-mail you created in step 1.
 We will switch your activation to FTDI mode, and send you a confirmation e-mail once this has been done.
@@ Line 62: / Line 82: @@
 Once you have received the confirmation e-mail, open License Manager again, and re-download the license using your customer area login credentials.
 ===== Disable FTDI Activation =====
+Generally it is advised to stick with FTDI activation once you have set it up for your license.
+If, for any reason, you must switch back to software activation or another FTDI, please follow the steps below. Please only do so if it is absolutely necessary!
+First, use the License Manager to re-initialize the FTDI device with a new license code, as described in the "Enable FTDI Activation" section above.
+You will see a warning message, telling you that you are going to overwrite the existing license code:
 {{ :licensing:pasted:20170220-091056.png?400 }}
+Then send the **new** license code to info@mairlist.com. It acts as some kind of proof that the previous dongle activation was made unusable. We will remove the previous FTDI activation from your license then, and make it available for another activation again.