Differences

This shows you the differences between two versions of the page.

--- hardware:supported_mixing_consoles [2019/07/09 16:18] – external edit 127.0.0.1
+++ hardware:supported_mixing_consoles [2019/09/10 16:00] (current) – [Series 52 (All models - RX2, SX2, 52/TX, 52/MX, 52/SX, 52/RX, etc.)] tw
@@ Line 10: / Line 10: @@
 ===== DHD =====
-==== Series 52 (All models - 52/SX, 52/RX, etc.) ====
+==== Series 52 (All models - RX2, SX2, 52/TX, 52/MX, 52/SX, 52/RX, etc.) ====
 Status: supported
-Console can be attached via TCP/IP or serial port.
+TCP/IP or serial port connection via DHD External Control Protocol (ECP).
+From DHD Firmware 8.x, Ember+ protocol can be used simultaneously for additional functionality, e.g. setting Global Labels from a script.
 ==== RM4200D ====
@@ Line 26: / Line 28: @@
 Status: limited support
-Serial port only. Uses a subset of the RM4200D/52 packets, with a slightly different serial protocol. Set "RM3200DMode=on" in remote.ini.
+Serial port only. Uses a subset of the RM4200D/52 packets, with a slightly different serial protocol. Set correct console type in DHD remote control configuration.
 ==== RM2200D ====
-Status: Supported since v6.1.5
+Status: limited support, since v6.1.5
+Uses an entirely different protocol than the other DHD products. Faderstart and PFL control supported.
@@ Line 62: / Line 65: @@
 Note: libember_slim.dll is packaged with mAirList but requires Visual C++ 2013 runtimes: http://www.microsoft.com/de-de/download/details.aspx?id=40784
 ===== D&R =====
+==== Webstation ====
+Status: supported, since v6.1
 ==== Airlite ====
-Status: supported (from v5.0)
+Status: supported, since v5.0
 ==== Airence ====
@@ Line 78: / Line 86: @@
 Status: remote control not supported
-USB connection is only for audio; needs external interface for fader start.
+USB connection is only for audio; separate USB interface required for fader start.
-==== Webstation ====
-Status: supported (from v6.1)
 ===== Studer =====
@@ Line 88: / Line 93: @@
 Status: remote control not supported
+Does not support SAS protocol.
 ==== OnAir 1000 ====
@@ Line 118: / Line 125: @@
 Uses SAS over TCP/IP or serial port.
+==== Micro ====
+Status: not supported
+Has no remote control over TCP or serial or USB at all. Only physical GPIO and Web.
 ===== Axia =====
@@ Line 131: / Line 144: @@
 ==== WheatNet-IP (LX-24 etc.) ====
-Status: supported as of mAirList 5.1
+Status: supported, since v5.1