Differences

This shows you the differences between two versions of the page.

--- hardware:supported_mixing_consoles [2016/01/08 11:47] – [OnAir 1000] tw
+++ hardware:supported_mixing_consoles [2019/09/10 16:00] (current) – [Series 52 (All models - RX2, SX2, 52/TX, 52/MX, 52/SX, 52/RX, etc.)] tw
@@ Line 10: / Line 10: @@
 ===== DHD =====
-==== Series 52 (All models - 52/SX, 52/RX, etc.) ====
+==== Series 52 (All models - RX2, SX2, 52/TX, 52/MX, 52/SX, 52/RX, etc.) ====
 Status: supported
-Console can be attached via TCP/IP or serial port.
+TCP/IP or serial port connection via DHD External Control Protocol (ECP).
+From DHD Firmware 8.x, Ember+ protocol can be used simultaneously for additional functionality, e.g. setting Global Labels from a script.
 ==== RM4200D ====
@@ Line 26: / Line 28: @@
 Status: limited support
-Serial port only. Uses a subset of the RM4200D/52 packets, with a slightly different serial protocol. Set "RM3200DMode=on" in remote.ini.
+Serial port only. Uses a subset of the RM4200D/52 packets, with a slightly different serial protocol. Set correct console type in DHD remote control configuration.
 ==== RM2200D ====
-Status: not supported
+Status: limited support, since v6.1.5
+Uses an entirely different protocol than the other DHD products. Faderstart and PFL control supported.
-Uses an entirely different protocol than the other models. No plans to add support.
 ===== Lawo =====
@@ Line 39: / Line 42: @@
 ==== sapphire ====
+Status: supported
+==== ruby ====
 Status: supported
@@ Line 50: / Line 57: @@
 Status: supported
-==== JADE Studio ====
+==== R3LAY VRX (formerly JADE Studio) ====
 Not a hardware mixing console but a software solution. Provides 8 GPIOs over Ember+.
@@ Line 58: / Line 65: @@
 Note: libember_slim.dll is packaged with mAirList but requires Visual C++ 2013 runtimes: http://www.microsoft.com/de-de/download/details.aspx?id=40784
 ===== D&R =====
+==== Webstation ====
+Status: supported, since v6.1
 ==== Airlite ====
-Status: supported (from v5.0)
+Status: supported, since v5.0
 ==== Airence ====
@@ Line 72: / Line 84: @@
 ==== Airmate, Airmate USB ====
-Status: not supported
+Status: remote control not supported
-USB connection is only for audio; needs external interface for fader start.
+USB connection is only for audio; separate USB interface required for fader start.
 ===== Studer =====
@@ Line 80: / Line 92: @@
 ==== OnAir 500 ====
-Status: not supported
+Status: remote control not supported
+Does not support SAS protocol.
 ==== OnAir 1000 ====
@@ Line 96: / Line 110: @@
 ==== OnAir 2000 ====
-Status: supported (tbc)
+Status: supported
 Uses SAS over serial port.
@@ Line 111: / Line 125: @@
 Uses SAS over TCP/IP or serial port.
+==== Micro ====
+Status: not supported
+Has no remote control over TCP or serial or USB at all. Only physical GPIO and Web.
+===== Axia =====
+==== Livewire ====
+Status: supported
+Uses the Axia TCP/IP Direct Interface on localhost port 93.
 ===== Wheatstone =====
@@ Line 116: / Line 144: @@
 ==== WheatNet-IP (LX-24 etc.) ====
-Status: supported as of mAirList 5.1
+Status: supported, since v5.1