Differences

This shows you the differences between two versions of the page.

--- config:remotecontrol:sas [2016/08/31 09:01] – [Voice Tracking] tw
+++ config:remotecontrol:sas [2016/08/31 09:06] – [Monitor] tw
@@ Line 66: / Line 66: @@
 mAirList will also record the audio levels for Player A and Player B as you move the faders, and turn them into volume envelopes in the recorded mix.
 ==== Other Sources ====
+The SAS protocol requires that you "assign" all sources that you plan to work with, in particular when working with actions or scripts (see below).
+{{ :config:remotecontrol:pasted:20160831-110246.png?400 }}
+If you plan to perform operations any other sources than those assigned to a player or the cartwall, enter their names here.
 ==== GPI ====
+On the //GPI// tab, you can assign [[reference:remote_control_commands|remote control commands]] to any GPI (general purpose input) of your console, one for "GPI goes on" and one for "GPO goes off":
+{{ :config:remotecontrol:pasted:20160831-110340.png?400 }}
+The GPIs - or GPOs, from the point of view of the console - are typically labelled //GPO.OAC// in the configuration of your console.
 ==== Monitor ====
+On the //Monitor// tab you can see all SAS messages received by and sent to the console.
+The Monitor is only available when you configure the remote control through the Control Panel (from within a running mAirList instance).
 ===== Actions =====
 ===== Scripting =====