Differences

This shows you the differences between two versions of the page.

--- config:remotecontrol:airlite [2018/03/21 07:10] – [Cartwall] tw
+++ config:remotecontrol:airlite [2022/04/15 15:03] (current) – Beispiel aktualisiert tondose
@@ Line 5: / Line 5: @@
 The AIRLITE is an 8-channel 19" mixer which includes four stereo USB audio interfaces, and a USB control module for fader start etc., all through a single USB connection.
-The WEBSTATION is the smaller brother of the AIRLITE, featuring 6 channels and three USB audio interfaces.
+The WEBSTATION is the little brother of the AIRLITE, featuring 6 channels and three USB audio interfaces.
 Configuration steps are similar for both models.
@@ Line 64: / Line 64: @@
 ==== Advanced ====
-On the //Advanced// tab, you can adjust the IP and ports that the AIRLITE interface software is running on. It is not required to make any changes here unless you are running the AIRLITE software on a different computer.
+On the //Advanced// tab, you can adjust the IP and ports that the AIRLITE/WEBSTATION interface software is running on. It is not required to make any changes here unless you are running the AIRLITE/WEBSTATION software on a different computer.
 ===== Scripting =====
-The AIRLITE remote offers an interface which can be used to communicate with the console from a script. To access the interface, use the following function:
+The AIRLITE/WEBSTATION remote offers an interface which can be used to communicate with the console from a script. To access the interface, use the following function:
   function AirliteRemote(iIndex: integer): IAirliteRemote;
+Note: Name of the function is always ''AirliteRemote'', and name of the interface is always ''IAirliteRemote'', also for WEBSTATION. (The same class is used used internally for both models.)
 Remotes are 0-based, so ''AirliteRemote(0)'' will return a reference to the first remote in the system.
-At the time being, the ''IAirliteRemote'' interface offers two useful functions:
+Up to mAirList 6.2, the ''IAirliteRemote'' interface offers two useful functions:
   procedure SetLED(iNumber: integer; iColor: TAirliteColor);
   procedure SetLEDBlink(iNumber: integer; iOnColor, iOffColor: TAirliteColor; iSpeed: TAirliteBlinkSpeed);
-The first one sets an LED of one of the push buttons to a particular color, the second one does the same, but with flashing. The available button IDs are:
+The first one sets an LED of one of the push buttons to a particular color, the second one does the same, but with flashing. The available button IDs for AIRLITE are:
   * "A" buttons: 0 (Button 1A) to 7 (Button 8A)
   * "B" buttons: 8 (Button 1B) to 15 (Button 8B)
+  * 255 (hex ''$FF''): All buttons at the same time
+And for WEBSTATION, given the lower number of butttons:
+  * "A" buttons: 0 (Button 1A) to 5 (Button 6A)
+  * "B" buttons: 6 (Button 1B) to 11 (Button 6B)
   * 255 (hex ''$FF''): All buttons at the same time
@@ Line 96: / Line 104: @@
   * ''albsNormal''
   * ''albsFast''
+Starting with mAirList 6.3, access to the following low level remote functions is possible through the ''IAirliteRemote'' interface:
+  function RemoteOn(iModule: TAirliteModuleType; iAction: TAirliteAction): integer;
+  function RemoteCue(iCueType: TAirliteCueType; iAction: TAirliteAction): integer;
+  function RemoteCueReset: integer;
+  function RemoteAutoCueAnnouncer(iAction: TAirliteAction): integer;
+  function RemoteAutoCueCRM(iAction: TAirliteAction): integer;
+  function RemoteNonStop(iAction: TAirliteAction): integer;
+  function RemoteComm(iModule: TAirliteModuleType; iAction: TAirliteAction): integer;
+  function RemoteCough(iModule: TAirliteModuleType; iAction: TAirliteAction): integer;
+  function RemoteVT(iModule: TAirliteModuleType; iAction: TAirliteAction): integer;
+Possible values for ''TAirliteModuleTypes'' are:
+  * ''almModule1''
+  * ''almModule2''
+  * ''almModule3''
+  * ''almModule4''
+  * ''almModule5''
+  * ''almModule6''
+  * ''almModule7''
+  * ''almModule8''
+  * ''almModuleAll''
+Possible values for ''TAirliteCueType'' are:
+  * ''actModule1''
+  * ''actModule2''
+  * ''actModule3''
+  * ''actModule4''
+  * ''actModule5''
+  * ''actModule6''
+  * ''actModule7''
+  * ''actModule8''
+  * ''actAux''
+  * ''actNonStop''
+  * ''actAir''
+  * ''actAll''
+Possible values for ''TAirliteAction'' are:
+  * ''alaDeactivate''
+  * ''alaActivate''
+  * ''alaToggle''
+==== Example ====
+Switch on //Cue// over AIR input when Extra-PFL is launched:
+  procedure OnExtPFLOn(Item: IPlaylistItem; ExtPFLCount: integer);
+  begin
+    if ExtPFLCount <> 0 then
+      AirliteRemote(0).RemoteCue(actAir, alaActivate);
+  end;
+… and turn off when Extra-PFL is closed:
+  procedure OnExtPFLOff(Item: IPlaylistItem; ExtPFLCount: integer);
+  begin
+    if ExtPFLCount = 0 then
+      AirliteRemote(0).RemoteCue(actAir, alaDeactivate);
+  end;