====== WheatNet-IP Remote Control ======

[[http://wheatstone.com/blades-ip-audio-network/wheatnet-ip-technology-overview|WheatNet-IP]] is an audio-over-IP technology used by devices from American manufacturer [[http://wheatstone.com/|Wheatstone Coperation]].

The WheatNet-IP remote in mAirList can connect to either BLADE or mixer devices, assigning remote control commands to SLIO (virtual logic states), or mixer channel statuses, respectively.

===== Configuration =====

Configuration of the remote controls is done in the standalone config app, or in the Control Panel, on the //Remote Control// page.

==== BLADE ====

On the //Remote Control// page, click //Add// and add a new //WheatNet-IP BLADE// remote. There are two tabs on the configuration dialog that appears.

On the first tab, //Connection//, enter the IP address of your BLADE, and the port number for the control protocol (usually 55776):

{{ :config:remotecontrol:pasted:20160906-151645.png?400 }}

On the second tab, you can assign [[reference:remote_control_commands|remote control commands]] to all 192 SLIOs available on the BLADE, or for the event that the SLIO goes ON, and one for OFF:

{{ :config:remotecontrol:pasted:20160906-151824.png?400 }}

Just click the respective cell in the table and select a command from the dropdown list, or type one manually.

==== Mixer ====

To add a new mixer remote, click //Add// on the //Remote Control// page, and select //WheatNet-IP Mixer//. On the first tab, enter the IP address and port (usually 55777) of your mixer:

{{:config:remotecontrol:pasted:20160906-152903.png}}

On the second tab, you can assign [[reference:remote_control_commands|remote control commands]] to any of the 64 channels of the mixer, and any of the //Channel On//, //Channel Off//, //CUE On// and //CUE Off// command of each channel:

{{ :config:remotecontrol:pasted:20160906-153037.png?400 }}